Exodus Services
(1) Pressure Instruments
We offer high quality calibration for pressure measuring instruments such as pressure gauges, transmitters, switches... etc. we are using Additel – Hydraulic ultra-high-pressure test pump 2800 Bar Capacity.
(2) Temperature Instruments
We have capability to calibrate all type of temperature
instruments from - 40° to 650°.
We are using the latest technology for the calibration dry well calibrator / bath.
(3) Electrical Instruments
We are using fluke 5502 multifunctional calibrator for as an electrical calibrator, which are capable of calibrating wide variety range of electrical instruments. our trained calibration engineers provide expert calibration for all type of electronic measuring instruments, our electrical laboratory is fully equipped to calibrate all type of electrical and electronics instruments.
Summary Specifications
| Function | Range |
|---|---|
| DC voltage | 0 to ± 1020 V |
| DC current | 0 A to ± 20.5 A |
| AC voltage | 1 mV to 1020 V, 10 Hz to 500 kHz |
| Volt*Hertz | 1000 V@ 10 kHz/33 V@100 kHz |
| AC current | 29 μA to 20.5 A, 10 Hz to 30 kHz |
| Waveforms | Sine, square, triangle, truncated sine |
| Resistance | 0 Ω to 1100 MΩ |
| Capacitance | 220 pF to 110 mF |
| Thermocouple (source and measure temperature) | B, C, E, J, K L N R, S, T, U 10 μV/°C and 1 mV/degC |
| RTD (source temperature) | Pt 385-100 Ω, Pt 3926-100 Ω Pt 3916-100 Ω, Pt 385-200 Ω, Pt 385-500 Ω, Pt385 1000 Ω, PtNi 385-120 Ω, (Ni120), Cu 427 10 Ω |
| Interfaces | RS-232, IEEE 488 |
| Frequency | .01 Hz to 2 MHz |
(4) Dimensional Calibration
Our dimensional laboratory is environmentally controlled ensuring the correct atmosphere for the precious measurements in your instruments are required. our engineersare providing expert calibration of all type of precision dimensional standards, gauges and hand tools. we are providing one of the world most accurate, ultra-precious standards to offer the lowest measurement and commercially available for a wide variety of length standards in Exodus calibration lab in the market.
(5) Weighing, mass & Torque calibration
We have capability to calibrate all type of torque wrench instruments from 0-1000 Nm, we are using the latest digital screen technology for the torque wrench instruments calibration. Our mass standard calibration laboratories are climate controlled with temperature maintained 22°c and humidity 50%.our mass calibration lab is equipped with marble table for the lab comparator, so we reduce the vibration to zero levels.
(6) Refrigeration Equipment & Instruments
We have capability to calibrate all type of Oven, incubator, chiller, freezer ...etc.
(7) Gas detection instruments
We are doing portable gas detector calibration, light meter, humidity sensor, loggers, Recorders…etc.
(8) Force Calibration
We have capability to calibrate all type of force Calibration up to 25 ton
(9) Volume Calibration
In the case of Volume calibration, we make sure the containers of the liquid are accurate & the valve flow, the amount flowing, and temperature are perfectly measured by using our high-quality instruments.
(10) Flow & Level Calibration
We offer the flow calibration which is the calibration of a flow sensing device like a flow meter or flow controller by analyzing its measurement against a flow measurement reference.
(11) Surveying & leveling instruments
Our engineers are using the Top-Quality Assured Instruments for Surveying and leveling works, to provide you with the best and better services.
(12) Functional testing and Certification
We have capability to calibrate all type of Indoor Air Quality Survey, Thermography Survey, Portable Appliance Test *(PAT test)
